The one-dimensional Hubbard model for large or infiniteU

The magnetic properties of the one-dimensional Hubbard model with a hardcore interaction on a ring (periodic boundary conditions) are investigated. At finite temperatures it is shown to behave up to exponentially small corrections as a pure paramagnet. An explicit expression for the ground-state degeneracies is derived. The eigenstates of this model are used to perform a perlurbational treatment for large but finite interactions. In first order inU ¹ an effective Hamiltonian for the one-dimensional Hubbard model is derived. It is the Hamiltonian of the one-dimensional Hcisenberg model with antiferromagnetic couplings between nearest neighbor spins. An asymptotic expansion for the ground-state energy is given. The results are valid for arbitrary densities of electrons.     

高聚物与光场相互作用的微观机制

分析光场与高聚物相互作用的微观机制，介绍高分子与小分子在光场作用下的极化过程。对在窄束光场作用下，高分子链极化后链上各处极化程度的分布情况进行研究，指出对于高度拉伸的聚合物薄膜，电偶极子模型不适合准确解释高分子与光场相互作用的微观机制。为此，采用符合实际的天线模型分析高分子天线与窄束光场的相互作用，从理论上推导出天线模型高分子链上一小段的极化公式，并用离散变分方法——DVM（discrete variational method）计算一个高分子链的极化分布，验证了文中推导出的分式的合理性。最后，将极化分布看作是电流在天线上的分布，计算了天线的次级辐射在空间中的角分布，得到天线模型对电偶极子模型的修正因子。     

Some remarks to multivariate regression model

Some remarks to problems of point and interval estimation, testing and problems of outliers are presented in the case of multivariate regression model. This work was supported by the Council of Czech Government J14/98:153100011.     

仓库容量有限条件下的随机存贮管理问题的评注

给出2005年全国部分高校研究生数学建模竞赛D题的研究背景,对参赛论文作了简要评注,并提供了一种参考解答.     

Convergent Flows of Molten Polymers Modeled by Generalized Second-Grade Fluids of Power-Law Type

The molding processes of polymer melts involve geometrically complex dies. Such dies are usually tapered or streamlined to achieve a maximum output rate under conditions of laminar flow. The model of a generalized second-grade fluid of power-law type is used and the results obtained are illustrated by examples of convergent flows in conical and wedge-shaped dies.     

具有模糊数的模糊多目标群体决策优选模型与方法

多目标群体决策问题是运筹学的一个重要研究领域，目前已经提出了一些有效的决策方法。但对目标值和权重均为模糊数的模糊多目标群体决策问题却研究不多，本对此类模糊多目标群体决策问题进行了探讨，利用相对正理想方案与相对负理想方案概念定义了相对差异距离，进而建立了模糊多目标群体决策优选模型与方法，并通过战役决心方案的评价说明了该方法是可行、有效的，可作为军事决策与决策支持系统的备选方法。     

Two-component model of solar plages

By use of the 2-m Mcmath-Pierce telescope at Kitt Peak, the high-quality spectra of a plage with moderate brightness near the center of solar disk were obtained. The data include seven spectral lines, which are Hα, Hβ, CaII H and K lines and the infrared triplet. With the consideration of fine structures of solar plages, a two-component atmospheric model is constructed by keeping the cool component to be the quiet atmosphere. Three cases of the hot component are given for different filling factors where the temperature and density distribution are adjusted in order to reproduce the seven observed spectral profiles. We also briefly discuss the influence of the column density at the base of the corona, m0, and the macro-turbulent velocity on the required filling factor and computed profiles. The two-component model is compared with precious one-component semi-empirical models. The limitation of the model is pointed out and further improvement is indicated.     

强流脉冲离子束辐照靶及其喷发的数值研究

利用拟合实测的TEMP Ⅱ型加速器磁绝缘二极管(MID)电压波形及其焦点附近束流密度曲线，建立了Gaussian分布模型，据此计算了与靶作用的离子的能量及数量，采用Monte Carlo(MC)方法计算了沉积在靶内的能量.并以此作为热源，与流体动力学(HD)模型相结合，对不同的靶状态采用相应的状态方程，模拟计算了靶内压力演化情况; 同时对烧蚀产生的等离子体采用理想气体状态方程, 结合HD方程组, 模拟计算了喷发过程中压力的空间演化过程. 关键词： 强流脉冲离子束 Gaussian模型 HD方程 数值研究     

Er3+掺杂的Bi2O3-B2O3-SiO2玻璃的光谱性质

测试了Bi₂O₃-B₂O₃-SiO₂玻璃中的Er³⁺离子的吸收光谱、发射光谱、⁴I_13/2的荧光寿命、拉曼光谱,及OH^-的傅里叶红外吸收光谱。应用Judd-Ofelt理论计算了该玻璃中的Er³⁺离子的J-O参数、振子强度、⁴I_13/2能级的寿命,从而利用测得的⁴I_13/2的荧光寿命得出了⁴I_13/2能级的量子效率(15%)。由于较低量子效率可能与OH^-有关,所以计算了玻璃中的OH^-浓度,发现其浓度较高(1.66×10¹⁹cm^-1,相当于Er³⁺浓度的3倍)。应用McCumber理论和四能级模型计算了Er³⁺离子的受激发射截面和荧光发射光谱的半峰全宽,结果与通过吸收光谱计算所得基本吻合。根据透射率和折射率的关系计算了折射率,发现和测量值相差很大,说明有较大的散射,通过拉曼光谱和显微镜测试,认为是玻璃中的微小气泡造成的。     

高温超导带材交流损耗的数值计算与分析

高温超导带材在许多领域得到越来越广泛的应用。交流损耗计算对于高温超导带材具有重要意义。该文介绍了两种交流损耗的数值计算模型,并以其中一种模型为例,对带材的交流损耗进行计算,与Norris公式计算结果作了比较,证明结果有效。最后提出了交流损耗数值计算中存在的问题。